30. PREAMP OUT
The PREAMP(previous amplifier) OUTPUT with XLR-M socket provides signal to a cassette deck or home
audio equipment.
32. ZONE 1~6 OUTPUT CONNECTOR
6 zone outputs with terminal connectors. The voltage of these outputs is 100V.
31. SPEAKER OUTPUT CONNECTOR WITH POLE
3 direct speaker outputs with pole connectors. These poles contain: COM, 4~16¦¸, 70V
and 100V.
33. DC 24V IN
Outside DC 24V input connector with 2 terminals.
34. POWER INPUT CONNECTOR WITH FUSE
The POWER INPUT CONNECTOR is connected to a electrical outlet by power cord. The powered mixer can
be supplied with the voltage AC115V/60Hz or AC230V/50Hz(push the power selector on the flank).
35. DC FUSE FOR THE POWER OF CMOS TRANSISTOR
TECHNICAL SPECIFICATIONS
Rating power
Mic input
Line input
Model
AC FUSE
300 mV, 10k Ohms
5 mV, 600 Ohms
180W RMS
5A/250V
250W RMS
DCB-120BC
120W RMS
7A/250V
10A/250V
DC FUSE
20A/250V
20A/250V
25A/250V
350W RMS
10A/250V
25A/250V
a. Please read the entire attached documents carefully before using the device, and keep them for your
reference.
b. The power supply must match the demand of the device with reliable ground wire.
c. All covering signal should be complied with the demand of the device.
d. Make sure to shut off before connecting
e. The device should be equipped far away high temperature, moisture and powerful electromagnetic field.
f. Please don't use organic cleaner but dry soft cloth to clear the device.
NOTES
DCB-180BC
DCB-250BC
DCB-350BC
29. A GROUP OF SEND AND RETURN
Connect SEND(with RCA jack) to another device for sending output signal to that device.
Connect RETURN(with RCA jack) to another device for accepting signal from that device.
If you don not use these, please connect SEND and RETURN for short circuit.
The MIC 5 input accepts a 1/4¡±
type TRS phone jack. Please use a low impedance microphone and a
properly wired cable for best results.
28. MIC 5
