background image

10. THE LED INDICATOR FOR POWER, FAULT, PEAK, SIGNAL AND LEVEL

When the power switch is turned on, the POWER LED will be illumed, so the user may be aware of it. 
When the FAULT LED is illumed, means the device is damaged, so you must stop using it.
The PEAK indicator circuit monitors the output signal level. When it illuminates, means that the gain or EQ 
boost should be reduced.
The signal LED lights when the output signal level reaches approximately -30dBu.
10-segment LED METER monitors output signal level.  

11. POWER SWITCH

Depressing the power switch supplies power to the power amplifier.

12. ZONE CONTROL

They are 6 rotatable band switches, to adjust 6 zone volumes in 5 steps.  

9. LEVEL VOL

Turn this knob to adjusts the final level of the Main output.

8. BASS CONTROL

Turn this knob clockwise to boost low frequency. The control has a shelving response giving 15dB of boost or
cut at 100Hz.

7. TREBLE CONTROL

Turn this knob clockwise to boost high frequency. The control has a shelving response giving 15dB of boost 
or cut at 10kHz.

6. AUX 3/MP3 VOL

This control determines the proportion of the AUX 3/MP3 channel signal in the mix, and provides a visual 
indication of channel vol. 

13. MP3 PLAYER WITH BLUE TOOTH 

(1)

 

The SD card connector.

(2) Mode: Press

 

this

 

key

 

and

 

release, change the source to USB, SD or Blue tooth.

(3) Play/Pause: In playing state, press this key to pause playing, press it again to recover playing. 

(4) Folder/Record: Press this key and release, enter the menu; press it and hold it, enter recording state. 

(5) Cycle mode: Press this key to change cycle mode. 

(6)

 

Prev-/

 

   : Press this key and release, jump to the previous song and play; push this button and hold it, enter

      the rewind  state.

(7)

 

Next/

 

   : Press

 

this

 

button

 

and

 

release,

 

jump to the

 

next

 

song and

 

play; push this button and hold it, enter

       the fast  forward state.

(8) The USB connector.

5. MIC 5/AUX 2 VOL

This control determines the proportion of the MIC 5/AUX 2 channel signal in the mix, and provides a visual 
indication of channel vol. 

1

2

3 4

5

6

7 8

Содержание DCB-120BC

Страница 1: ...mines the proportion of the MIC 2 LINE 1 channel signal in the mix and provides a visual indication of channel vol 3 MIC 3 LINE 2 VOL This control determines the proportion of the MIC 2 LINE 1 channel signal in the mix and provides a visual indication of channel vol 4 MIC 4 AUX 1 VOL This control determines the proportion of the MIC 4 AUX 1 channel signal in the mix and provides a visual indicatio...

Страница 2: ... CONTROL Turn this knob clockwise to boost high frequency The control has a shelving response giving 15dB of boost or cut at 10kHz 6 AUX 3 MP3 VOL This control determines the proportion of the AUX 3 MP3 channel signal in the mix and provides a visual indication of channel vol 13 MP3 PLAYER WITH BLUE TOOTH 1 The SD card connector 2 Mode Press this key and release change the source to USB SD or Blue...

Страница 3: ...MIC 2 input accepts XLR phone jack while the LINE 1 input accepts a 1 4 type TRS jack Please use a low impedance microphone and a properly wired cable for best results 18 AUX 1 INPUT The AUX 1 input with RCA sockets allows cassette recorder or CD player and sent to the Main output 17 MIC 3 LINE 2 INPUT The MIC 3 input accepts XLR phone jack while the LINE 2 input accepts a 1 4 type TRS jack Please...

Страница 4: ...120BC 120W RMS 7A 250V 10A 250V DC FUSE 20A 250V 20A 250V 25A 250V 350W RMS 10A 250V 25A 250V a Please read the entire attached documents carefully before using the device and keep them for your reference b The power supply must match the demand of the device with reliable ground wire c All covering signal should be complied with the demand of the device d Make sure to shut off before connecting e...

Отзывы: