Page 9
© GBC Films Group October 2000
Arctic Titan 165 Operation and Maintenance Manual
10.
Slide the film shafts into the new rolls of film ensuring that the film will unroll from the
bottom for poly-in film. Slide the core adapters onto the shafts. Tap the core adapters
into the film rolls and tighten the thumbscrews. See Figure 6.
Figure 6
11.
Return the film shafts onto the unit by first inserting hex end of the film shaft into the left
hand side of the machine and then inserting the round end into the receptacle on the left
side of the machine. See Figure 7.
Figure 7
