GBC 930-073, Руководство по эксплуатации и обслуживанию

Страница: 21 / 26

© 2004 General Binding Corporation
Spartan Operation and Maintenance Manual
Page 6-3
6.3 Lamination pouches
INFORMATION: Treat the pouch carriers carefully
as they may be reused until you see wrinkles in the
lamination.
1.
Turn the laminator on.
2.
Center the lamination pouch between the two sheets
of the pouch carrier.
Pouch carrier
Lamination
pouch
3.
Fold the top sheet of the pouch carrier and the
lamination pouch over.
4.
Center the image on the lamination pouch and carefully
lay the top sheets back over the image.
Pouch carrier
Lamination pouch
Image
5.
Set the pressure handle to the lamination position.
6.
Wait for READY to illuminate.
7.
Press RUN.
+
8.
Align the leading edge of the pouch carrier containing
the lamination pouch and image slightly off center of the
table.
9.
Gently slide the pouch carrier into the roller nip until
you feel the rollers catch the pouch carrier.
10.
As the pouch carrier nears its end, be prepared to
catch the pouch carrier as it exits the rear of the laminator.
11.
Press STOP and set the pressure handle to the roller
release position.
+