© 2006 General Binding Corporation
Page
12
TENSION ADJUSTMENT KNOBS AND
MOTOR
PRINT CLAMP (Artic Titan 1064 WF c)
A
B
Fig. 5-7. Artic Titan 1040 WF c Tension Adjustment Knobs
and Motor
A
B
A. Rewind Motor
(Figure 5-7)
B. Film Tension Adjustment Knobs
(Figure 5-7)
A. Rewind Tension Adjustment Knob
(Figure 5-8)
B. Film Tension Adjustment Knobs
(Figure 5-8)
The film supply shaft tension knobs allow the operator to
increase or decrease the film web tension as needed to
reduce curl and wrinkles. The rewind tension knob allows
the operator to adjust the amount of pull on the release
liner. This prevents the release liner from being pulled into
the laminator or the film from wrapping around the rewind
tube.
A. Release Latch
(Figure 5-9)
B. Print Clamp
(Figure 5-9)
Helps keep prints against the feed table while being fed into
the rollers. This clamp may be removed for mounting
boards.
Fig. 5-8. Artic Titan 1064 WF c Tension Adjustment
Knobs
A
B
Fig. 5-9. Print Clamp and Latch
