7
! WARNING:
When installing the device, check the squareness (straight line), to avoid any mechanical damage and
irregular load (bending).
When installing the appliance in the proximity of walls, partitions, kitchen furniture, decorative coverings
etc., these should be made of non-combustible material. If this requirement is not fulfilled, they must be
coated with non-combustible insulating material.
Compliance with regulations on fire protection must be ensured.
CONNECTING THE APPLIANCE
Connecting the device to the mains must be carried out according to applicable laws and regulations.
Warning!
Appliance can be connected only by an authorized qualified person in accordance with applicable
laws, regulations, and recommendations of the indication written on the label and with due regard
for safety measures regarding leakage current.
Electrical fryter is connected to the mains via a fixed connection to the earth terminal.
Installation and connection must be made so that the built-in and connected device is not possible to
access the live wires parts without the use of tools.
A fuse in the permanent electrical installation must be provided for the proper amperage (see table).
We recommend installation of switch in the permanent electrical installation, which separates all poles
from the mains with a 3 mm distance between the open contacts. Connection point for potential
equalization coupled with a conductor that has a cross-section of 10 mm2.
Instructions for the first connection and operation
•
Connecting the appliances must be performed by a qualified person in accordance with
regulations. After connecting and installing the components must pass the control test connected circuits
and consumers to ensure the safe and proper operation.
PROTECTION AGAINST OVER-VOLTAGE
Protection against over-voltage is performed using grounding.
