11
Works can only be carried out by qualified and authorized persons
Before starting work it is necessary to switch turn switches of all cooking zones off and remove the fuse
or switch off the main fuse so that the appliance
completely disconnected from the electrical network.
In case of repairs only original spare parts may be used
CLEANING AND MAINTENANCE
It is necessary to daily clean the machine using the following procedure:
- Turn the appliance off (position of the thermostat knob and the main switch - off) and allow to cool
- Drain the oil from the basin of the appliance and wipe the backing thoroughly with a dry cloth or paper
towel (heavy grease stains removed by pouring a little hot water with detergent to clean the tank and thus
achieve maximum hygiene)
- For easier cleaning of the appliance rotate heaters when they are cold to the top position, so you have
easier access to the bottom of the pool.
- Care should be taken that the appliance before reuse thoroughly dry
Warning!
Whenever purified appliance and lift-rotate the cold electrical pipe heaters button should be main
switch in position off.
Electrical deep-frying should not be cleaned with a water jet or high-pressure cleaning machine!
When cleaning electric deep fat fryers should not be used mushrooms wire, wire brushes or other
sharp objects.
Do not salt dishes in the deep fryer, because salt causes foaming and adversely affect the quality of
oil.
Maintainers must have adequate training;
- Carry out routine checks, and all checks specified in the instructions for use;
- For all repairs required to keep proper records.
PROCEEDING IN CASE OF FAULT ON THE APPLIANCE
In case you notice any abnormal operation of fryers or malfunction, switch off the machine so that the
main switch and the thermostat knob to position 0. For this, call the manufacturer or an authorized
customer service.
Troubleshooting within the warranty period is implemented by the manufacturer or its authorized service,
while maintenance and repairs outside the warranty period is carried out according to agreement with the
customer.
Devices must be cleaned and inspected regularly and inappropriate parts should be replaced if
necessary.
Instructions for repairs and maintenance
•
all works be carried out only by qualified and authorized person;
•
before starting work it is necessary to turn off the power supply and the device shall be marked
with appropriate warning sign;
•
all work is carried out in accordance with the manufacturer's instructions and original spare parts;
