Gazer MMW50 Series, Руководство пользователя

Страница: 9 / 40

9
ENG
Mirror connection
To connect the device, do the following:
• Connect the black wire (GND) to the car chassis, the yellow wire
(BAT+) - directly to the +12 V terminal of the car battery or to the
power line with the constant voltage of +12 V.
• Connect the red wire (ACC+) to the car’s +12 V ACC+ power wire
(ACC power turns on when the car engine starts and turns off when
it stops).
• Connect the green wire (REVERSE) to the +12 V power wire of the
rear lights. In this case, whenever the reverse gear is engaged, the
mirror will switch to the rear-view camera mode.
• Connect the video input jack (Camera IN) with the video output
VIDEO OUT jack of the rear-view camera.
• Connect the switching unit jack to the corresponding jack on the
mirror.