Gazelle Panasonic system, Руководство пользователя

Страница: 31 / 36

31
PANASONIC SYSTEM
LCD centre display LCD side display Description Remedy
M
B
DD
E
km/h
Speed sensor
warning
The speed sensor is unable to
detect the signal.
Switch the system on again.
Check the speed sensor. If this
does not solve the problem,
take the e-bike to your Gazelle
specialist.
M
B
DD
E
km/h
Battery communication fault
Communication with the battery
is not taking place correctly.
Remove dirt from the battery
contacts. If this does not solve the
problem, take the e-bike to your
Gazelle specialist.
M
B
DD
E
km/h
Overheating (motor)
Safe mode has been activat-
ed because the motor unit is
overloaded.
Reduce the load as you cycle.
After a short while the tempera-
ture will revert to normal and the
assist function will resume.
M
B
DD
E
km/h
Overheating (battery)
Safe mode has been activated
because the battery is overloaded.
Reduce the load as you cycle.
After a short while the tempera-
ture will revert to normal and the
assist function will resume.
M
B
DD
E
km/h
Bike function button (walk
assist) fault
The bike function button (walk
assist) is pressed in or shorted.
Check the bike function button
(walk assist) to ensure it is not
pressed in and press the on/off
button to switch the device on
again. If this does not solve the
problem, take the e-bike to your
Gazelle specialist.
M
B
DD
E
km/h
Average speed fault There is
insufficient data to calculate
average speed.
Reset average speed.
* Measured data such as distance
travelled will not be updated as long as
[E] is shown, even if the assist function
has been activated.
M
B
DD
E
km/h
EEPROM error
The console is showing an error.
Take the e-bike to your Gazelle
specialist.