G9701 Infrared Thermal Imager
vii
service center. We shall not assume any responsibility for problems caused by
unauthorized repair or maintenance.
●
A few device components (e.g., electrolytic capacitor) require regular replacement.
The average lifespan varies, so periodic checking is recommended. Contact your
dealer for details.
Using Environment
●
DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or
damp environments. Make sure the running environment meets the requirement of
the device. The operating temperature shall be -10 °C to 50 °C (14 °F to 122 °F), and
the operating humidity shall be 90% or less.
●
This device can only be safely used in the region below 2000 meters above the sea
level.
●
Avoid equipment installation on vibratory surface or places subject to shock (neglect
may cause equipment damage).
●
Do not aim the lens at the sun or any other bright light.
Emergency
●
If smoke, odor, or noise arises from the device, immediately turn off the power,
unplug the power cable, and contact the service center.
Laser
●
When any laser equipment is in use, make sure that the device lens is not exposed
to the laser beam, or it may burn out.
The laser radiation emitted from the device can cause eye
injuries, burning of skin or inflammable substances. Before
enabling the light supplement function, make sure no human
or inflammable substances are in front of the laser lens.
●
Do not place the device where minors can fetch it.
