2
connecting material from the crimping head.
5.2 Explanation of the application range
Attention Do not use on or near live circuits.
Before starting to crimp please make sure that all parts involved in the crimping process are
not connected to live circuits.
The tool can be operated in a temperature range from -20
℃
to +40
℃
indoors and outdoors.
5.3 Mounting instructions
The same is valid for conducting material. No guarantee can be given for crimping C-clamps
of other suppliers.
Despite the same code numbers the compression width for copper and aluminium cable lugs
and connectors is different. Besides the marking of the dies the surface plating also differs.
Attention
Even if the code number is identical only those dies should be used which are suitable
for the material.
5.4 Service and Maintenance crimping
The hydraulic tool must be cleaned and dried after each use. The tool is maintenance free.
After one year we recommend sending the tool in to the manufacturer for an inspection.
Within the determined use of the tool only the dies are permitted to be changed by the
customer.
6. Troubleshooting
- The tool leaks oil.
=> Return the tool to the professional manufacturer. Do not open the tool.
7. Technical data
Crimping force: 60kN
Weight: 3.8 kg
Stroke: 17mm
Rated pressure: 700 bar
Crimping capacity: Max 300mm²
Standard dies: Cu50-300mm²
Dimensions: 50*17*7cm
