ZZZ-182.41212.1206-18.GP.EN.SUN
WEB VERSION
SUN-HI 6
Step 8:
After inserting the PC roof panels, insert the aluminum middle roof joints (O, P, Q) into the roof
rafters. The below drawing view is from the inside of the solarium, looking up.
Notes:
The drain holes on the aluminum middle roof joints (O, P, Q) should be at the bottom.
To adjust the middle joints to line up : once all polycarbonate roof panels are in place, use a
small piece of wood and hammer, then tap down on the middle of the joint bringing it down
and holding at the same time the joint and top polycarbonate.
Do not tap too hard.
Step 9:
Insert the outer PC roof panels (Jj, Kk, Mm) according to below drawing. They should overlap
about two inches under the upper PC roof panels and into the aluminum middle roof joints.
Before
After
Before
After
TOP VIEW
