background image

3

Pro

 line

Pro

 line

3.3  

Compatible products and accessories

Product name

Gavita part number

Compatible power cord

Gavita RST Mains cable DCA 0.6m

CB6873121

Gavita RST Mains cable DCA 1.0m

CB6853431

Power cord EU, 5 meter

PC6852017

Power cord UK, 5 meter

PC6852018

Power cord CH, 5 meter

PC6852019

Power cord ZA, 5 meter

PC6852020

Power cord IL, 5 meter

PC6852021

Power cord IL, 5 meter

PC6852022

3.4  

Environment

The product is intended to be used in greenhouses and climate rooms (indoor or outdoor). The lamps function optimally 
when the ambient temperature is between 20 - 45 °C.

3.5  

Legal

Approval according to: IEC 60598-1:2014; IEC 60598-1:2014/AMD1:2017; IEC 60598-2-1:1979; IEC 60598-2-1:1979/
AMD1:1987; EN 55015:2013+A1:2015; EN 61547:2009; EN 61000-3-2:2014; EN 61000-3-3:2013

4  

Safety recommendations and warnings

 

6

Warning!

 Carefully read the warnings below before using or working with the product!

• 

Always adhere to the local rules and regulations when installing or using the luminaire.

• 

The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a 
similar qualified person.

• 

The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 6.5 m is not 
expected.

• 

This product may cause interference to radio equipment and should not be installed near maritime safety 
communications equipment or other critical navigation or communication equipment operating between 0.45 - 30 
MHz.

• 

Do not use the luminaire when either its optics, LED boards, or its power cord are damaged. Replace the power cord 
only with original certified cords.

• 

Modifications to the cords can lead to unwanted electromagnetic effects, which makes the product not comply with 
legal requirements.

• 

Do not expose the luminaire to:

 

− (ambient) temperatures outside the specified range;

 

− direct sunlight during use or HID light that could heat up the ballast.

• 

Always disconnect the luminaire from mains before performing any maintenance.

• 

Always allow for a cool down period of at least 30 minutes before touching the luminaire. Touching the luminaire when 
the luminaire is lit or immediately afterwards will result in severe burns!

• 

Do not use the luminaire near or above flammable, explosive or reactive substances. Do not use sulfur vaporizers.

• 

The installation and use of the luminaire is the responsibility of the end user. Incorrect use or installation can lead 
to failure and damage to the luminaire. Damage to the luminaire and electronic circuitry as a result of incorrect 
installation and use revokes the warrant.

Содержание Proline CT 2000e











Отзывы: