Gavita GAN Electronic 750 W 400 V DE EU, Руководство пользователя

Страница: 5 / 8

8. Precautions when using the fixture
Warning! Never use the fixture without a lamp or reflector!
Warning! Always wait 20 - 30 minutes for the emitter cover/reflector to cool down!
9. Troubleshoot using the status LED
Note: The status LED is present at 1000 W models only.
The status LED provides information on the condition of the lamp and electronic ballast.
Consult table 1 to interpret the status LED. LED signals are represented by colored red dots.
9.1. Status indications
Status LED message Status fixture Description Action/Solution

No error The lamp is working correctly -
 
EOL timer expired
Maximum number of ignition attempts
done without succes or a driver is
locked or has failed
Reset mains cycle manually
   
Cycle error
Maximum number of succesful ignition
attempts done (lamp stopped for
unknown reason)
Reset mains cycle manually
     
Low mains Mains voltage too low Mains cycle automatically resets
       
Thermal overload
Maximum driver temperature
exceeded
Reset mains cycle manually
         
Lamp voltage out
of range
Lamp voltage too low, lamp voltage too
high or DC shift detected
No action required.
           
High mains
Mains voltage too high and/or DC-bus
voltage too high
Mains cycle automatically resets
             
Ignition busy Ballast is trying to ignite the lamp -
Legend
LED message Time (approx.)

256 ms.


512 ms.
 
Table 1