![background image](http://html1.mh-extra.com/html/gaui/x7-flybarless/x7-flybarless_instruction-manual_3804311021.webp)
19
GAUI
GAUI
TAI SHIH HOBBY CORPORATION
TAI SHIH HOBBY CORPORATION
N3x5.5L_________
2
M3x10__________
2
組裝主齒盤時請使用W12.1x17x1.2。
如齒輪間隙不足可使用W12.1x17x0.2或W12.1x17x0.3
適當調整齒輪間隙約0.1mm。
將M3x10與N3x5.5L含上
主軸定位器。
W12.1x17x0.2
W12.1x17x0.3
W12.1x17x1.2
N3x5.5L
M3x10
1.將主軸固定螺絲M4x23鎖緊。2.上提主軸後並鎖緊主軸定位器。
M4x23__________
1
N4x7___________
1
M4x23
N4x7
主齒盤組裝- 1
主齒盤組裝- 2
Fix the main shaft collar
with M3x10 and
N3x5.5L screws as
illustrated, but not
tighten yet.
Use W12.1x17x1.2 washer for assembling the
main gear. Adjust for adequate gear mesh about0.1mm,
if not enough gear mesh, use W12.1x17x0.2 or
W12.1x17x0.3 washers.
1. Tighten the M4x23 main shaft fixing screw.
2. Lift up the main shaft, then tighten the main shaft collar.
Main Gear Assembly-1
Main Gear Assembly-2
請注意: 當主旋翼轉速低於2300rpm 時,建議使用105mm尾旋翼。
當主旋翼轉速高於2300rpm 時,建議使用95mm尾旋翼