GAUI
TAI SHIH HOBBY CORPORATION
Tools and Equipment for Assembly
自備工具及設備
2.0mm Hexagon screwdriver
3.0mm Hexagon screwdriver
2.5mm Hexagon screwdriver
3.5mm Hexagon screwdriver
2.0mm 六角螺絲起子
3.0mm 六角螺絲起子
2.5mm 六角螺絲起子
3.5mm 六角螺絲起子
Needle-nosed pliers
Diagonal cutting plier
Ball Link Plier
Phillips screwdriver
尖嘴鉗
斜口鉗
拔豆鉗
十字螺絲起子
Scissors
High Strength Tape
FBL system
Transmitter & Receiver (6 c)
剪刀
高韌性強力黏著膠帶
陀螺儀
六動以上接收機&發射機
CCPM Mini servo x3pcs
Tail Specialized Servo x1pc
CA
CCPM伺服機x3個
尾舵伺服機x1個
瞬間膠
General thread lock
Anaerobic adhesive
Lubricant / one-way bearing grease
AB glue
螺絲止鬆劑
特殊型缺氧膠
潤滑油 / 單向軸承油
AB黏著劑
A
B
Pillar
P-柱狀體
P(Dia.out)x(Length)
P(外徑)X(長度)X(實心柱)
N-Nut
N-螺母
N(Dia.out )x(Width) L-Lock nut
N(外徑)X(長度)
W-Washer
W-
華司
W(Dia
.in)xDia.out)x(Thickness)
W(內徑)X(外徑)X(厚度)
P-tube
P-柱狀體
P(Dia.in)x(Dia.out)x(Length)
P(內徑)X(外徑)X(長度)
B-Bearing
B-
軸承
B(Dia.in)x(Dia.out)x(Thickness)
B(內徑)X(外徑)X(厚度)
Ø-TapScrew
Ø-
粗牙螺絲
Ø(Dia.out)x(Length)
Ø(外徑)X(長度)
M-Machine Screw
M-公制螺絲
M(Dia.out)x(Length)
M(外徑)X(長度)
一般型止鬆劑
務必鎖緊螺絲並確認上膠
Apply general thread lock.
Be certain to tighten screw and
apply thread lock.
Apply anaerobic adhesive.
使用特殊型缺氧膠。
Apply lubricant
依個人需求使用潤滑油。
危 險: 組裝過程中請小心安裝並注意
此危險程度可能造成安全性漏洞
導致人為傷害。
Danger: High level of attention must be
taken during assembly.
Action during assembly might be hazardous.
Extreme care should be taken to avoid injury.
以上圖示，於組裝時請確實注意，避免組裝後試飛造成失控零件鬆脫等情況發生。
Make sure to assemble the parts as shown in figure above. Incomplete or incorrect assembly may
cause control failure during flight.
Apply anaerobic adhesive.
Be certain to tighten screw and
apply thread lock.
特殊型缺氧膠
務必鎖緊螺絲並確認上膠
一般型止鬆劑
鎖緊螺絲並確認上膠
Apply general thread lock.
Tighten screw and apply thread lock.
Apply general thread lock.
一般型止鬆劑
使用瞬間黏著劑
Apply CA glue
使用AB黏著劑
Apply AB glue
組裝對應號碼
Assembly package
Battery 6S 22.2v 2200~5000mAh
鋰聚電池6S 22.2v 2200~5000mAh
