GAUI GU-INS, Инструкция по сборке

Страница: 8 / 30

System Setting
1.For your safety, before setup, please remove the propellers, and notice the LED lights on the GU-INS.
2.Turn on the transmitter, and move the
throttle stick to its top position.
3.Connect the battery to the 500X, the motors will come up
with corresponding tones, and the LED light of “MODE”
lights “ Red flashing”.
4.Then move the throttle stick to its lowest
position.
5.The motors will come up with corresponding tones, LED light
of “MODE” lights “Solid green”, and the calibration of ESCs
is completed.
6
MODE 1
MODE 1