7
Installation of Dash Cam
1
. Check orientation of the Dash Cam camera first before
installation.
2
. Ensure windscreen is clean and free of debris. Use an
Alcohol wipe to enhance adhesion.
3
. Place mounting bracket on Dash Cam. Remove backing
off 3M tape and press & hold firmly to windscreen for 60
seconds.
4
. Fix where the vision is not blocked (Place close to
rear-view mirror is recommended). Do not install the device
on airbag or within its working range.
5
. Insert Micro SD card into the Dash Cam
6
. Insert Mini USB end of the power cord into the Mini USB
interface/ charging point of the Dash Cam. Connect
charging end of the cable into 12V power socket of vehicle.
7
. Adjust the mounting bracket and rotate the camera
direction to get the best view. Ensure of the vehicles
bonnet is visible from the bottom of the screen for alignment.
8
. Turn vehicles ignition to accessories and the Dash Cam
will power ON and start recording automatically, you will
hear an audible tone once powered.
9
. The recording indicator light will start flashing RED. A red
circle will also flash on the screen and a red timer will
appear when recording has started.
10
. For the Dash Cam to work it must receive power from
the charging adapter. Once power is removed or turned off
the Dash Cam will save the current file and turn off.
