Gato Audio PWR-222, Руководство пользователя

Страница: 8 / 12

Gato Audio PWR-222 - Mono Power Amplifier
Page 8
How does it work?
Power on
Use the mains switch on the back of the amplifi er to turn it on. The amplifi er will enter Standby mode.
Standby
To exit Standby mode press the Standby button on the front of the amplifi er. It will need a few moments
before it is ready. Press the Standby button again to enter standby.
It is possible to control the standby mode by connecting it to a piece of equipment featuring a 12 V trigger
(e.g. pre amplifi er or integrated amplifi er) with a mini jack cable. The power amplifi er will then go into standby
in sync with the connected equipment.
Display modes
The central display of the amplifi er can be set to show three diff erent display modes which are described
below. To select a display mode simply press the Display button on the front panel of the amplifi er. The display
will switch modes in this order:

VU Meter

Temperature

Display Dim
VU Meter
The VU meter display mode shows the output power of the amplifi er. The pointer responds to peaks on a scale
illustrated by two white end brackets. The red bracket indicates 0 dB.
Temperature
The PWR-222 core temparture can be read out in the display. The scale is illustrated by two white end brackets.
The pointer will show the temperature. The normal working temperature for the amplifi er is right about 12
o’clock.
Dim
The display can be dimmed by pressing the Display button on the front of the amplifi er. The display is now
turned off except for one LED indicating the dimmed display state. Press the button again to exit display
dimming mode.
Standby
Power up routine
VU Meter
VU
Dimmed Display
Temperature
0 dB
+6 dB
Warm
Cold
∞