Gato Audio PRD-3S, Руководство пользователя

Страница: 7 / 16

User Manual
Page 7
Connecting to a Bluetooth device
Before connecting the PRD-3S to a Bluetooth device (your phone, tablet or computer), you need to screw in the antenna to the back of the
amplifi er where it says “BT antenna”, as per the drawing on the previous page. To hear music from Bluetooth choose the BT input on your
amplifi er.
Initial Connection
For initial connection press the “BT connect” button on the back of the amplifi er once. Then go to the settings of the Bluetooth device
(your phone or tablet) and connect to “Gato Audio PRD-3S”.
Disable Bluetooth
To disable Bluetooth on the PRD-3S press and hold the “BT connect” button on the back of the amplifi er for 2-5 seconds. All connected
Bluetooth devices should now be disconnected. To Enable Bluetooth again press and hold the “BT connect” button 2-5 seconds. All
previously connected devices should automatically reconnect if they have Bluetooth enabled.
Reconnect
If you stopped the Bluetooth function on your phone or tablet, you will need to reconnect. Go to the settings of the Bluetooth device (your
phone or tablet) and connect to “Gato Audio PRD-3S”. Alternatively enable Bluetooth on your phone or tablet, then turn off your amplifi er
and turn it back on. The Bluetooth device should automatically reconnect.
Multiple Connections
The PRD-3S Bluetooth supports multiple devices to be connected at the same time. While a device is connected, press the “BT connect”
button on the back of the amplifi er once. Then go to the settings of the new Bluetooth device (your phone or tablet) and connect to “Gato
Audio PRD-3S”. The fi rst device has priority over the following devices.
The PRD-3S Bluetooth stores up to 10 devices that have been connected. When it has stored 10 devices it will automatically make room
for new by deleting the oldest device fi rst.
Connecting a computer to USB
Before connecting the PRD-3S to your computer via USB, please read the installation instructions on page 11.
Connecting an Apple iPad to USB
It is possible to stream music from an iPad to the USB port of the PRD-3S. An Apple Camera Connection Kit is required for this feature. The kit
is available from the Apple online store or other Apple accessory shops.
Plug the camera connector into the iPad dock connector and connect it to the PRD-3S with a USB cable. Simply start your music app and
enjoy the music.
Connecting an Apple iPhone to USB
Like the Apple iPad it is possible to stream music from an iPhone to the USB port of the PRD-3S. The procedure is exactly the same as for the
iPad, however it is only possible for iPhones with IOS 7 and later.
Connecting NPM to the network
If you own a PRD-3S with a Network Player Module installed, please refer to the supplied NPM Quick Start Guide or fi nd the full NPM manual
online at www.gato-audio.com/downloads.