Gato Audio AMP-150, Руководство пользователя

Страница: 8 / 12

Gato Audio AMP-150 - Integrated Amplifier
Page 8
RC-1 remote control
The RC-1 is an infrared remote control for Gato Audio products.
How to insert/replace the batteries
The RC-1 runs on two standard AAA batteries and its standby power consumption is so low that it will operate perfectly even if it has not
been used for a whole year.
1.
Remove the screw on the bottom of the remote control with the enclosed hex key
2.
Remove the bottom part of the unit now facing upwards
3.
Insert or replace the two AAA 1.5V batteries in the battery trays on the top part
4.
Put the bottom and top parts back together again
5.
Put the screw back in and tighten. Be careful not to over-tighten it!
AAA 1.5V + AAA 1.5V +
The screw
The bottom part
Battery trays
The top part
The hex key
The RC-1 has a few sharp edges. Be careful not to cut yourself or anyone else.