Chapter 8: BIOS Setup 77
Boot menu
Exit menu
The Exit menu contains the options available once you have made changes to the
Setup menus. Use the arrow keys to make your selection and follow all screen
prompts.
Exit menu
Press the <Esc> key to access the Exit menu and accept or discard changes. Press
<F9> to return to the factory defaults, or <No> to return to the previous settings.
Use the right arrow key to move over to the next menu.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specif ic Help
1. [Diskette Drive]
2. [Hard Drive]
3. [CD ROM Drive]
Use <Up Arrow> or
<Down Arrow> to select a
device, then press <+> to
move it up the list or <->
to move it down the list.
Press <Esc> to exit this
menu.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Default
ESC Exits
←→
Select Menu Enter Select > Sub-Menu F10 Save and Exit
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Exit System Setup and
save your changes to
CMOS.
F1 Help ¦Ø Select Item -/+ Change Values F9 Setup Default
ESC Exits ¨Æ Select Menu Enter Select > Sub-Menu F10 Save and Exit
Note:
The Setup menu screen shown
may differ somewhat from
that shown here. If there are
differences, follow the on-
screen instructions and helps.
Note:
The Setup menu screen shown
may differ somewhat from
that shown here. If there are
differences, follow the on-
screen instructions and helps.
