Gateway NV42 Series Скачать руководство пользователя страница 21

Страница: 21 / 200

Chapter 1

Status Indicators

The computer has several easy-to-read status indicators. The front panel indicators are visible even when the

computer cover is closed.

Icon

Item

Description

Power indicator

•

LED on - Notebook is on.

•

LED blinking - Notebook is in Sleep or Hybrid Sleep mode.

•

LED off - Notebook is off.

Battery charge

indicator

•

LED blue - Battery is fully charged.

•

LED red - Battery is charging.

Important:

This LED only lights up when your notebook is

connected to AC power.

Hard drive

•

LED blinking - The drive is being accessed.

•

LED off - The drive is not being accessed.

Caps lock

•

LED on - Caps lock is turned on.

•

LED off - Caps lock is turned off.

Num lock

•

LED on - Num lock is turned on.

•

LED off - Num lock is turned off.

Bluetooth

•

LED on - Bluetooth communication is turned on.

•

LED off - Bluetooth communication is turned off.

Содержание NV42 Series









































































































































































































Результаты поиска

Содержание NV42 Series

Отзывы:

Gateway NV42 Series, Руководство по обслуживанию, Страница: 21 / 200

Результаты поиска

Содержание NV42 Series

Отзывы: