Gateway M305, Руководство по обслуживанию

Страница: 60 / 89

55
Replacing the palm rest assembly
www.gateway.com
To replace the palm rest assembly:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
“Preparing the notebook”
on page 6 .
2
Turn the notebook over so the bottom is facing up.
3
Remove the battery by following the instructions in “Removing the
battery” on page 7 .
4
Remove the hard drive kit by following the instructions in “Replacing the
hard drive kit” on page 18 .
5
Turn the notebook over so the top is facing up.
6
Remove the keyboard cover by following the instructions in “Replacing
the keyboard cover” on page 24 .
7
Remove the keyboard by following the instructions in “Replacing the
keyboard” on page 27 .
8
Remove the LED indicator panel by following the instructions in
“Replacing the LED indicator panel” on page 38 .
9
Remove the hinge covers by following the instructions in “Replacing the
hinge covers” on page 42 .
10
Remove the cooling assembly by following the instructions in “Replacing
the cooling assembly” on page 45 .
11
Use your fingers to unplug the LCD panel connector from the notebook
by following the instructions in
“Replacing the LCD panel assembly” on
page 49 . Grasp the large cluster of cables, then pull the connector straight
up.
12
Remove the screw holding the LCD grounding wire by following the
instructions in
“Replacing the LCD panel assembly” on page 49 .
13
Turn the notebook over so the bottom is facing up.