Gateway M305, Руководство по обслуживанию

Страница: 14 / 89

9
Adding or replacing memory modules
www.gateway.com
To add or replace memory modules:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
“Preparing the notebook”
on page 6 .
2
Turn the notebook over so the bottom is facing up.
3
Remove the battery by following the instructions in “Removing the
battery” on page 7 .
4
Loosen the captive screw that secures the memory cover. (The screw cannot
be removed.)
5
Lift the screw side of the cover upward, then slide the cover out.
6
If you are removing a module, gently press outward on the clip at each
end of the memory module until the module tilts upward.