Gateway KAS-303 Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 122

background image

106

Safety, Regulatory, and Legal Information

www.gateway.com

Regulatory compliance statements

United States of America

Federal Communications Commission (FCC)
Unintentional emitter per FCC Part 15

This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio or television
reception. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio and television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

■

Reorient or relocate the receiving antenna

■

Increase the separation between the equipment and receiver

■

Connect the equipment to an outlet on a different circuit from that to which the receiver is
connected

■

Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

Canada

Industry Canada (IC)
Unintentional emitter per ICES-003

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage
radioélectrique édicté par Industrie Canada.

Caution

Changes or modifications not expressly approved by
Gateway could void the FCC compliance and negate your
authority to operate the product.

«
...
110
111
112
113
114
...
»

Содержание KAS-303



























































































































Отзывы:

Нет отзывов

Похожие инструкции для KAS-303

Бренд: Panasonic Страницы: 94

Бренд: Polk Mono Страницы: 86

Бренд: Pure Acoustics Страницы: 1

Бренд: Rainbow Страницы: 26

Exubera Pro UC EV9333-50

Бренд: Everpure Страницы: 2

Бренд: Redback Страницы: 2

Бренд: Acoustech Страницы: 8

Бренд: Crosley Страницы: 36

Бренд: Qilive Страницы: 72

Бренд: Toa Страницы: 4

Бренд: RCA Страницы: 2

Бренд: RCA Страницы: 16

Бренд: Emerson Страницы: 29

Бренд: Emerson Страницы: 34

Бренд: Emerson Страницы: 43

Бренд: Emerson Страницы: 34

Бренд: Emerson Страницы: 42

Бренд: Emerson Страницы: 34

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды