Gateway GM5416, Справочное руководство

Страница: 79 / 132

www.gateway.com
73
•
DVDs and DVD drives contain regional codes that help
control DVD title exports and help reduce illegal disc
distribution. To be able to play a DVD, the disc’s regional
code and your DVD drive’s regional code must match.
The regional code on your DVD drive is determined by
your computer’s delivery address. The regional code for
the United States and Canada is 1. The regional code for
Mexico is 4. Your DVD drive’s regional code must match
the regional code for the disc. The regional code for the
disc is on the disc, disc documentation, or disc
packaging.
If the DVD movie does not play, the disc’s regional code
and your DVD drive’s regional code may not match.
Diskette drive
The diskette drive is not recognized
•
Shut down and restart your computer.
You cannot save a file to diskette or you see the message
“disk is full or write-protected”
•
Make sure that the write-protection tab on the
upper-right corner of the diskette is down
(unprotected).
•
Delete unnecessary files on the diskette and try
again.
•
Make sure that the diskette you are using is
IBM-compatible.
•
Try a different diskette. Occasionally diskettes are
flawed and cannot be read by the diskette drive.
•
Run Error-checking on the diskette. For more
information, see
“Checking the hard drive for errors”
on page 60 . If errors are detected and corrected, try
using the diskette again.
You see an “Access Denied” or “Write protect” error
message
•
Move the write-protection tab in the upper-right
corner of the diskette down (unprotected).
•
The diskette may be full. Delete unnecessary files on
the diskette and try again.
•
Make sure that the diskette you are using is
IBM-compatible.
•
Try a different diskette. Occasionally diskettes are
flawed and cannot be read by the diskette drive.
8512041.book Page 73 Friday, December 15, 2006 5:08 PM