background image

Appendix A: Safety, Regulatory, and Legal Information

www.gateway.com

Some products are equipped with a three-wire power cord to make sure that the product is 
properly grounded when in use. The plug on this cord will only fit into a grounding-type 
outlet. This is a safety feature. If you are unable to insert the plug into an outlet, contact an 
electrician to install the appropriate outlet.

If you use an extension cord with this system, make sure that the total ampere rating on the 
products plugged into the extension cord does not exceed the extension cord ampere rating.

If your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure that the 
antenna or cable system is electrically grounded to provide some protection against voltage 
surges and buildup of static charges.

Care during use

Do not walk on the power cord or allow anything to rest on it.

Do not spill anything on the system. The best way to avoid spills is to avoid eating and 
drinking near your system.

When the monitor is turned off, a small amount of electrical current still flows through the 
monitor. To avoid electrical shock, always unplug all power cables and modem cables from the 
wall outlets before cleaning the system.

Unplug the system from the wall outlet and refer servicing to qualified personnel if:

The power cord or plug is damaged.

Liquid has been spilled into the system.

The system does not operate properly when the operating instructions are followed.

The system was dropped or the cabinet is damaged.

The system performance changes.

Replacement parts and accessories

Use only replacement parts and accessories recommended by Gateway.

Warning

To prevent electric shock, never remove the cover. No user 
serviceable parts inside. Refer servicing to qualified 
service personnel.

Important

Do not use Gateway products in areas classified as 
hazardous locations. Such areas include patient care 
areas of medical and dental facilities, oxygen-laden 
environments, or industrial facilities.

8508376.book  Page 22  Thursday, October 18, 2001  9:20 AM

Содержание FPD1520



























Отзывы: