Gateway E-9722R, Руководство пользователя

Страница: 50 / 112

CHAPTER 4: Installing Components
44
3
Press the retaining clip (1) on the power supply to the left to release the power supply
module (2) from the chassis.
4
Using the handle, pull the power supply module straight out of the server. It may take
considerable force to remove.
5
Push the new power supply module into the server, with the retaining clip on the right,
until it locks into place.
6
Reconnect the AC power cord for the new power supply module.
Replacing the power distribution module
To replace the RPS power distribution module:
1
Follow the instructions in “Preventing static electricity discharge” on page 24 . Make sure
that you turn off the server, then unplug the power cord(s) and all other cables connected
to the server.
2
Follow the instructions in “Opening the server case” on page 25 .
3
Remove the PCI riser assembly by following the instructions in “Installing and removing
PCI expansion cards” on page 34 .
4
Remove the fan duct and system fan cage by following the instructions in “Replacing
system fans” on page 38 .
5
Disconnect the main power, CPU power, backplane power, I
2
C power, and midplane power
cables from the system board. See “System board” on page 5 for the location of the
connectors on the system board.