background image

CHAPTER 3: Maintaining Your Server

www.gateway.com

24

4

Run the update utility on the USB 

Disk-on-key

 device.

Using your Server Companion DVD

You can use your 

Server Companion DVD

 to:

Install hardware drivers

Install programs

Upgrade the BIOS and firmware

View server documentation

Server Companion DVD contents

The 

Server Companion DVD

 is a tool you can use to help maintain your server. 

The DVD contains:

Computer and component documentation

Drivers and utilities for servers running Windows 2003 Server

Viewing documents

The DVD contains documents for your server and for some optional 
components. You can view the documents with the Acrobat® Reader® version 
4.0 and above.

To view documents:

 

1

Insert the 

Server Companion DVD

 into the DVD drive on a computer 

running the Windows operating system. The Gateway Application and 
Driver Recovery window opens.

- OR - 

If the window does not open, run the file 

Runmenu.exe

 on the DVD.

2

Click 

Documentation

. The server document list opens.

3

Click the title of the document you want to view. The document opens.

4

To access files manually, open the 

Docs\Manuals

 folder on the 

Server 

Companion DVD

.

To install Acrobat Reader 7:

 

Click the link for Acrobat on the Documentation page.
- OR -

Run 

Docs\Reader\app21279\Setup.exe

 from the 

Server Companion 

DVD

.

Содержание E-9520T































































































































Отзывы: