Gateway 980 Скачать руководство пользователя | Manualshive

Страница: 123 / 131

background image

118

Appendix C:

www.gateway.com

Notices

Copyright © 2003 Gateway, Inc.
All Rights Reserved
14303 Gateway Place
Poway, CA 92064 USA

All Rights Reserved

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or
transmitted by any means or in any form, without prior consent in writing from Gateway.

The information in this manual has been carefully checked and is believed to be accurate. However, changes are
made periodically. These changes are incorporated in newer publication editions. Gateway may improve and/or
change products described in this publication at any time. Due to continuing system improvements, Gateway is
not responsible for inaccurate information which may appear in this manual. For the latest product updates,
consult the Gateway Web site at www.gateway.com. In no event will Gateway be liable for direct, indirect, special,
exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if
advised of the possibility of such damages.

In the interest of continued product development, Gateway reserves the right to make improvements in this
manual and the products it describes at any time, without notices or obligation.

Trademark Acknowledgments

1-800-GATEWAY, ActiveCPR, ALR, AnyKey, black-and-white spot design, CrystalScan, Destination, DestiVu, EZ
Pad, EZ Point, Field Mouse, Gateway 2000, Gateway Country, gateway.net, Gateway stylized logo, Perfect
Scholar, Solo, TelePath, Vivitron, stylized “G” design, and “You’ve got a friend in the business” slogan are
registered trademarks and black-and-white spotted box logo, GATEWAY, Gateway Astro, Gateway@Work,
Gateway Connected touch pad, Gateway Connected music player, Gateway Cyber:)Ware, Gateway
Education:)Ware, Gateway Flex Case, Gateway Gaming:)Ware, Gateway GoBack, Gateway Gold, Gateway
Learning:)Ware, Gateway Magazine, Gateway Micro Server, Gateway Money:)Ware, Gateway Music:)Ware,
Gateway Networking Solutions, Gateway Online Network (O.N.) solution, Gateway Photo:)Ware, Gateway
Professional PCs, Gateway Profile, Gateway Solo, green stylized GATEWAY, green stylized Gateway logo,
Gateway Teacher:)Ware, Gateway Video:)Ware, HelpSpot, InforManager, Just click it!, Learn@Gateway, Kids
BackPack, SERVE-TO-ORDER, Server Watchdog, SpotShop, Spotshop.com, and Your:)Ware are trademarks of
Gateway, Inc. Intel, Intel Inside logo, and Pentium are registered trademarks and MMX is a trademark of Intel
Corporation. Microsoft, MS, MS-DOS, and Windows are trademarks or registered trademarks of Microsoft
Corporation. All other product names mentioned herein are used for identification purposes only, and may be the
trademarks or registered trademarks of their respective companies.

«
...
121
122
123
124
125
...
»

Содержание 980




































































































































Отзывы:

Нет отзывов

Похожие инструкции для 980

SUPERO SuperServer 1018L-MP

Бренд: Supermicro Страницы: 104

Бренд: TYANO Страницы: 68

ANR-C62-N1 Series

Бренд: Acrosser Technology Страницы: 57

Бренд: Supermicro Страницы: 62

ApplianceStor 75

Бренд: Rasilient Страницы: 24

Бренд: Kraun Страницы: 36

Бренд: D-Link Страницы: 113

Бренд: D-Link Страницы: 100

IP-DECT SERVER 6500

Бренд: SpectraLink Страницы: 126

Edgeline EL4000

Бренд: HPE Страницы: 57

ProLiant ML110 Gen10

Бренд: HPE Страницы: 101

ProLiant ML110 Gen10

Бренд: HPE Страницы: 159

NetNumen U31 R06

Бренд: Zte Страницы: 128

Бренд: Planet Networking & Communication Страницы: 97

Бренд: IBM Страницы: 2

Бренд: IBM Страницы: 2

72335LU - System x3850 M2

Бренд: IBM Страницы: 96

Бренд: IBM Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды