Gateway 920, Руководство пользователя, Страница: 43 / 151

37
System administration
www.gateway.com
4
Type the password and press E
NTER
, then type it again and press E
NTER
.
5
Exit the BIOS Setup utility.
For information about bypassing BIOS passwords, see “Bypassing the BIOS
passwords” on page 77 .
Monitoring case access
Whenever the server’s case cover is removed, the intrusion switch is activated
and an event is recorded in the event log.
To view the event log:
1
Restart your server, then press F2 when the Gateway logo screen appears
during startup. The BIOS Setup utility opens.
2
Open the
Advanced
menu, select
Event Log Configuration
, then select
Event
Log Area
. The event log is shown on the screen.
Option Description
Supervisor password To control access to system configuration, set a
supervisor password. Using a supervisor password lets
you make changes to any setting in the BIOS.
Passwords can be temporarily disabled. To bypass the
passwords, see
“Bypassing the BIOS passwords” on
page 77 .
User password To control access to the server, set a user password. The
supervisor can set the level of access granted to the user
password. The user password access levels are:
■
No Access . User cannot access the BIOS Setup utility.
■
Limited . User can change only the date and time.
■
View Only . User can see all settings, but cannot
change them.
■
Full . User can change every setting except the
supervisor password.
Passwords can be temporarily disabled. To bypass the
passwords, see
“Bypassing the BIOS passwords” on
page 77 .