Gates OPTICAM 4S, Руководство по эксплуатации

Страница: 7 / 26

7
GATES.COM
OPTICAM 4S / OPTICAM 4S DP
OPERATING MANUAL
2. USER INSTRUCTIONS
2.1 PURPOSE OF THIS DOCUMENT
This user manual is designed to facilitate the
process of becoming acquainted with the device and
to make use of its intended application possibilities.
The user manual contains important information
on how to operate the device safely, properly and
economically. Observing this information will help to
prevent dangers and accidents, lower repair costs
and downtime, and increase the reliability and
lifespan of the device.
2.2 INSTRUCTIONS ON PRECAUTIONARY
MEASURES OF THE USER
This cutting ring assembly device may only be
operated by someone who possesses the necessary
qualifi cations for the respective work and who is in
the full possession of his or her physical and mental
capabilities.
The national legislation on work and environmental
protection applicable at the site of operation (e.g.
labour organisation) must be observed.
The device must be kept in a technically sound
state at all times and may only be operated in
such a state.
In addition to the manual, the applicable, binding
regulations on accident prevention in the country of
use and at the deployment site must be observed.
The generally recognised technical rules on safe and
proper working must furthermore also be adhered to.
3. LIABILITY AND WARRANTY
The cutting ring assembly devices of Gates Tube
Fittings GmbH are manufactured without error in
material and processing, the quality has been tested.
The performance, quality and safety of the device are
up to date with the latest technology.
The condition for warranty services by Gates Tube
Fittings GmbH is that the device is deployed solely for
its intended use. Gates Tube Fittings GmbH shall not
be liable for any other cases of warranty, in particular
tacit warranties regarding non-impairment and
marketability.
Under no circumstances can Gates Tube Fittings
GmbH be made liable for indirect, coincidental,
special or consequential damages such as the loss of
expected profi ts or services.
The maximum sum of liability for Gates Tube Fittings
GmbH towards the buyer is limited to the purchase
price paid by the buyer.The warranty period is 12
months with the exclusion of wear parts. Other
manufacturers’ subsystems that are integrated
into the cutting ring assembly device shall continue
to possess their respective original manufacturer
warranty.In the event of a valid claim for defects
made against Gates Tube Fittings GmbH, the claims
of the buyer shall be limited to repair services or
replacement.
A warranty claim must have arisen within the
warranty period. Gates Tube Fittings GmbH must be
informed immediately in writing of any error or defect
that occurs with the device. In order to inform the
manufacturer of a defect or an error in a valid and eff
ective manner the letter of notifi cation must contain
the following information:
ƒ
Name, address and possibilities of contacting the
claimant
ƒ
Device designation
ƒ
Product and serial number
ƒ
Time of the occurrence of the error
ƒ
Precise informative description of the device defect
ƒ
A copy of the purchase receipt must be attached
In the event of a justifi ed warranty claim Gates Tube
Fittings GmbH will repair the device and if necessary
replace it with a new device.