Gates Magnum Coulter Disk, Руководство оператора

Страница: 23 / 39

21 124756 / 6-2014
O P E R A T I O N & M A I N T E N A N C E
Start-Up And Hydraulic Operation (Cont’d)
Before Initial Operation
1. After receiving or assembling your disk, it is a good
practice to double check the entire machine so that all
bolts are securely tightened.
2. Make sure all grease fittings are in place and greased
properly.
3. Inflate all lift tires to the recommended inflation
pressure of 120 PSI and check wheel bolts. See page
24 for specifications.
After First Two Hours of Operation
1. Re-check wheel bolts for tightness and tighten
spindle nuts if any side play is evident in the bearings.
2. Check coulter hubs for any side play in the bearings
and tighten the spindle nuts if necessary.
Maintenance
NOTE: For maximum bearing life, add grease when
bearings are at operating temperature.
DANGER: Stand clear of the implement
when wings are being raised or lowered.
Hydraulic or mechanical failure may result in
rapid uncontrolled falling of wings. Failure to
follow these instructions may result in
serious injury or death.
CAUTION: Tractor engine should be
stopped and wheels blocked to prevent any
movement during servicing.
CAUTION: Escaping hydraulic fluid under
pressure can penetrate the skin causing
serious injury. Relieve pressure before
disconnecting the hydraulic lines. Check /
Tighten all connections BEFORE applying
pressure. Use a piece of cardboard or paper
to search for leaks. NEVER use your hand.
IF ANY fluid is injected into the skin seek
immediate medical attention.