EM7 CINE Setup
Page 7
Secure EM7 CINE to Camera Housing
✓
EM7 CINE Setup is best conducted
with it secured to a camera housing.
✓
Refer to the image
for a typical mounting of the EM7 CINE to a housing.
Open the Housing Shell
✓
Loosen four screws
using the 5/32 ball driver.
These screws are captive
and will
not remove. Refer to the image below.
✓
Remove the front shell
to expose the LCD and power connector in the rear shell.
Loosen four screws and
then remove the front
shell.
Slide Monitor Dovetail
onto Housing and
tighten thumbscrews.
NOTE: EM503 shown.
