C300/C500 Setup
Page 7
2:
C300/C500 Setup
C300/C500 requires complete and thorough setup prior to use.
C300/C500 Housing Preparation
Port.
Remove the Port by rotating 90 degrees Counter Clock Wise (CCW) direction
while facing the front of the housing. Gently pull the Port away from the Port Ring
or Front Bulkhead.
TIP:
Liberal lubrication of the Port o-ring allows easy rotation during
installation/removal.
CAUTION: PORT / PORT RING ROTATION.
When rotating the Port, the Port Ring
may rotate also. If so, hold the Port Ring in position while rotating the Port. Then
remove the Port Ring as described next.
N=
O=
Rotate the port 90 degrees
counterclockwise direction, then
gently pull forward to remove.
