![background image](http://html1.mh-extra.com/html/gates/ax100/ax100_setup-use-and-care-manual_3744861008.webp)
The AX100 Setup
Page 8
AX100 Housing Preparation
Open the AX100 shell.
Two stainless steel safety latches secure the housing
halves. They have a positive locking feature, so to open them you must first
depress the center bar release while lifting the rear lever.
Separate
the rear half of housing from the front.
Retract and Rotate controls.
Pull out the Focus and Custom Wheel control about
one inch or until they stop.
Release the latches
Separate housing shells