The AX100 Setup
Page 10
Installing the Camera into the Housing
Pull out
Focus and Custom controls.
The Focus and Custom control need only be
retracted ~ 1in / 2.5cm.
Carefully slide camera
onto dovetail until it stops.
Secure the camera
by rotating the cam lock clockwise.
Open the LCD fully
as shown in the image on the next page. If necessary, gently
press it into the receiver on the left side of the housing.
Press in
the
Focus and Custom controls.
Check controls.
At this point it’s a good idea to check all controls on the front shell
for proper operation. (See section 4 for controls mentioned here.)
Pull out Focus and
Custom controls.
