Gates Underwater Products F55, Руководство по установке, использованию и уходу

Страница: 20 / 49

F55 Setup Page 20
Set the focus/iris indicators.
The left and right side Gear Controls have indicator
rings. These shipped in the parts kit. These are white plastic for marking focus / iris
indications.
Secure the ring with the two set screws in the knob as shown.
Verify Operation.
Once positioned and secured check operation of the Focus and
Iris controls. They should rotate freely – but with slight resistance – in both
directions and through the entire range of travel. If not, repeat steps 1-3.
In a subsequent section “Check Operation” you will power on the camera and verify
the Zoom control is also smooth and operational.
Slip the white ring over the
Gear Control knob.
Secure with set screws
here and opposite on the
knob.