EM5 ULTRA Setup
Page 7
Secure EM5 ULTRA to Camera Housing
✓
EM5 ULTRA Setup is best conducted
with it secured to a camera housing.
✓
Refer to the image
for a typical mounting of the EM5 ULTRA to a housing.
Open the Housing Shell
✓
Loosen four screws
using the 5/32 ball driver.
These screws are captive
and will
not remove. Refer to the image below.
✓
Remove the front shell
to expose the LCD and power connector in the rear shell.
Loosen four screws and
then remove the front
shell.
Slide Monitor Dovetail
onto Housing and
tighten thumbscrews.
NOTE: EM503 shown.
