Gater WYZ34FS600V, Руководство оператора

Страница: 8 / 20

8
SAFETY INTERLOCK SYSTEM
Your Worldlawn Rider is equipped with a Safety
Interlock System that is designed to help
prevent possible serious injuries.
Understanding and maintaining this system is
vital, for maximum safe operation
To Start Engine
1.
Blades (PTO) must be “OFF”
2. Control levers in neutral (swung out)
3.
Park Brake “ON”
4. Operator in seat.
The Engine will kill if:
1. The operator leaves the seat with
a. The control levers out of neutral (swung
in)
b. The blades on (PTO)
c.
The park brake is “OFF”
d. All the above
2. The park brake is set before the control
levers are in neutral (swung out):
CORRECT TRANSMISSION
OPERATION
The Worldlawn rider is equipped with a Hydro
Transaxle unit for each wheel and are controlled
with “Motion Control Levers”, one for each wheel.
See Figure 1
MOWING SPEED
The Worldlawn rider is designed to operate most
efficiently at maximum blade speeds.
The running speed of the machine should allow the
mower blades to maintain this maximum speed
while mowing across turf. Use a slower ground
speed for cutting tall grass, grass which is heavy
with moisture, or when mowing uphill. If ground
speed is too fast, or blade speed is too slow,
mowing will be uneven because mower blades will
not be able to left grass into cutting position as the
mower passes.
Throttle control regulates speed of engine as
measured in RPM. This control SHOULD NOT be
used to control ground speed.