How to Use
15
Fingerprint
》 Fingerprint Guide
•
You may register up to 20 fingerprints. (The same applies to Normal/Security Mode)
※ Note that you may not register 20 fingerprints depending on the state of the previously registered fingerprints.
•
Scan-type fingerprint modules do not recognize fingerprints with water or foreign materials and
set off alarm sounds.
•
Make sure to register a password just in case you fail to register a fingerprint.
•
Make sure to leave the door open when registering a password because you may accidentally lock
a door while trying to register or change a password the first time.
•
If an error occurs during registration, the process reverts back the beginning (entering fingerprint).
•
If no more input is made for 20 seconds after registering at least 1 fingerprint, the registration will be complete.
•
Duplicate fingerprints may be registered.
•
Same fingerprints can be registered repeatedly.
Repeated Operations
➞
1⃞
2⃞
3⃞
4⃞
5⃞
6⃞
➞
➞
➞
Press and lift up the Guide
Bar on the fingerprint cover.
You will see the fingerprint cover
being raised and start to open.
When the fingerprint cover is
completely open, the lamp will
be on.
Start sweeping your fingerprint
through the sensor.
Complete your fingerprint
registration.
Normal Mode :
It enables you to make separate registration, and open a door through the registered
fingerprint or password.
Security Mode :
It enables you to make separate registration and deletion, and open a door only when
the fingerprint number and the fingerprint match.
To change modes: Please refer to page 19.
How to Use
14
2⃞
Press number 2 button
➞
Enter the Master Number
➞
Enter button
3⃞
Register fingerprint
- 3 times
It enables you to make separate registration, and open a door through the registered fingerprint or password.
Normal Mode: Use Fingerprint
》 To Register Fingerprint
》 To Open Door with Fingerprint
Order
Play
Description
After the operation lamp is on, sweep your fingerprint
3 times through the fingerprint sensor according to
the voice guide.
Press the
Ⓘ
(Registration) button in the back body again to
complete the fingerprint registration.
( Press [#] button to continue the fingerprint registration process.)
Press the number 2 button according to the voice guide.
Press the Master Number and then the [#] button on the
keypad.
1⃞
Lift the fingerprint
cover open
Order
Play
Description
Lift open the fingerprint cover and wait for the operation
lamp to light on.
2⃞
Enter fingerprint
Sweep the registered fingerprint through the fingerprint
sensor in the front body.
Make sure to examine if the door opens normally with the
registered password or fingerprint after the registration is
complete.
Check if a door opens!
Directions
Note
1⃞
Press
(Registration)
button
Open the battery cover in the back body and
press
Ⓘ
(Registration) button once.
4⃞
Press
(Registration)
button
