Remote Control Module
Remote control Module
》 Install Remote Control Module
1⃞
Remove batteries
3⃞
Insert batteries
2⃞
Install Remote Control Module
4⃞
Confirm the installation
If you hear a
‘ting-a-ling’
sound, the Remote control
Module has been installed
correctly. Close the
battery cover.
Buy the Remote control Module and install it to link the remote control.
Not only FSK method but also the wireless encryption algorithm has been applied.
Open the battery cover
in the back body
and remove
all batteries.
Equip the Remote control Module
to the connector.
Insert all the batteries by
checking the [⊕, ⊖]
connector.
Option
28
Remote Control
》 To Register Remote Control
》 To Release Remote Control
Option
29
Extra Features
Ting-a-ling
•The operation status may only be examined through the remote control.
Note
•The wireless encryption algorithm resorts to the floating ID technology where the wireless
password is changed every time the remote control is operated.
Note
Order
Play
Description
Enter the number 7 and then, 5 again on the keypad.
2⃞
Enter number 7 and
5 on the keypad
1⃞
Press
(Registration)
button and button
Open the battery cover in the back body.
Press
Ⓘ
(Registration) button and then, [#] button.
Press the
Ⓘ
(Registration) button in the back body again
to complete the procedure.
3⃞
Press
(Registration)
button
2⃞
Enter number 0 and
5 on the keypad
3⃞
Register fingerprint
Order
Play
Description
Press the SET button of the remote control
Enter the number 0 and then, 5 button on the
keypad.
Press the
Ⓘ
(Registration) button in the back
body again to complete the procedure.
4⃞
Press
(Registration)
button
1⃞
Press
(Registration)
button and button
Open the battery cover in the back body.
Press
Ⓘ
(Registration) button and then, [#] button.
