SV12 v3
44 of 55
•
Once the 8 Tag Points have been placed on the mats press OK.
•
Repeat for each camera image (Left, Right, Front, Rear).
•
Press Calibrate Button.
•
If Calibration fails or Tag Points missing again, move mat positions and start again.
•
Use the Length
–
and + buttons to decrease or increase the length of vehicle.
•
Use the Width
–
and + buttons to decrease or increase the width of the vehicle.
•
Cover any black zone with the vehicle overlay.
•
Use the rotate buttons to rotate vehicle if not straight in the image.
•
The four directional arrows can be used to move the overlay image in the corresponding
direction.
•
When satisfied with overall image press ok.
▪
By pressing the left mouse button while scroll mouse is over the image, you can rotate the
image 360-degrees to verify calibration image.
▪
If not satisfied, more adjustments can be made by pressing the Adjust button.
▪
When complete, Press Export button.
