SV12 v3
19 of 55
4.4
Handling Calibration
4.4.1
Board Sheet
1.
We need 4 marking mats for the calibration. It is recommended to use a 100 x 100 cm mats
with 20 x 20 cm black and white patterns as shown below.
2.
Lay marking mats parallelly around the vehicle and make sure you can see the whole board
sheet through the camera. Lay them as close as possible to the vehicle. Place the “A” marked
corner closer to the vehicle.
3.
The calibration mats may need to be moved so that the mirrors do not block the view of the
calibration mats. (Dark shadows and or reflecting sunlight on one or more of the mats, may
require the movement of the mats and or moving vehicle to another area to avoid harsh sunlight
and shadows)
4.5
Upgrade from SV12 to SV12 v3
Please refer to the following for upgrading SV12 to SV12 v3:
1.
Upgrade SV12 video processor to SV12 v3 video processor:
You will need the following to replace SV12 video processor with SV12 v3 video processor (For retrofit
SV12 Conventional video processor and SV12 Transit video processor):
•
SV12 v3 video processor
•
SV12 v3 medusa camera cable (CAB000516)
•
Retrofit adapter cable (CAB000531)
You will need the following to replace SV12 video processor with SV12 v3 video processor (For retrofit
SV12 Exterior video processor):
•
SV12 v3 video processor
•
SV12 v3 medusa camera cable (CAB000516)