13
Sensors
The 504-HD allows for up to six sensor inputs, all of which are user configurable, with Sensor 1, 2 and 3 being pre-configured in
the DVR, see table below. The wire from these Six sensor connections are approximately Five meters long.
Figure 4: Sensor Connection Example
SENSOR’S 1-6 are inputs. In the example on the right
S1 has been set up for Brakes; S2 for Warning
Lights; see Table 2 for remaining definitions.
Using the On-Screen menu go to SETUP
EVENT
SENSOR, enable the required sensors for the install,
make sure the alarm switch is ON for each required
sensor. In Figure 5, only S4 “DOOR” has been enabled.
Once Sensors have been set, Click SAVE.
Figure 5: Sensor Setup.
CAB000323
Sensor Wire and Color
Sensor
OSD Name
SENSOR_IN1 (Red)
Brake
BK
SENSOR_IN2 (Red)
Warning Lights
WN
SENSOR_IN3 (Red)
Stop Arm
SA
SENSOR_IN4 (Red)
Door
DR
SENSOR_IN5 (Red)
Left Turn
LT
SENSOR_IN6 (Red)
Right Turn
RT
SENSOR_IN7 (Red)
Not Assigned
Blank
SENSOR_IN8 (Red)
Not Assigned
Blank
