GM720A-YF A
/C Service Station
10
Note: Amount of supplying
：
Setting the amount according to remain amount in the tank.
Suggestion: supplying amount = (4.5~5) - remained amount.
M1-4: When alarming, please close the valve of the refrigerant tank and until finished automatically.
Method 2:
Use the supplying connecter
M2-1: Fitting the supplying connecter to the port of fresh refrigerant tank.
Note: it should connect to the liquid port of fresh refrigerant tank. If has no liquid port, please
place the fresh refrigerant tank upside down.
M2-2: Connect the HP (or LP) coupler to the supplying connecter.
M2-3: Select the Recovery function and run it.
M2-4: When you see the total amount more than 4.5kg, close the valve of the refrigerant tank and until
finished automatically.
Note:
Main Tank: the tank is installed in the machine which is used for the flushing, recovery, recharging
functions.
Auxiliary Tank (fresh refrigerant tank): the refrigerant tank is installed by user which is just used for
the recharging.
14-2) Parameter setting
14-2-1: Change the language.
14-2-2: Change the units.
14-3) Change refrigerant type
If you want to use another type refrigerant, you must do this function.
Please operate following the
prompts step by step.
