Gastrofrit 110135, Руководство по эксплуатации, Страница: 4 / 24

4
www.gastrofrit.ch
© Switzerland Gastrofrit AG
Unternehmens-Dokumentation
Anschlussschema FittingBox (intern) Schütz
Dok-Nr.:ARAN-002 Dok-Typ: Arbeitsanweisung
Herausgeber Version Datum Datei: Anschlussschema_FittingBox_Schütz_Gastro8.DOC
COO/ Markus Rüsch 0 August 2010 Seite 1 of 1
Power IN ST1
Power Out ST2
Power out/ Heizung
ST3
Schütz
A1 A2
+ -
S
Speisung
1 2 3
SSR
+/-
JP3
1 2
Schütz+
/-
JP3
1 2
Leiterplatte Gastro 8 Power
1
2
3
1
2
3
L1
L2
L3
1
2
3
black phase to the right gray clamp.clamp.
Mechanical attachment of the lifting motor
The underside of the plate on which the lifting mo-
tor rests must be cleaned of dirt, oil splashes, insu-
lation and other objects
1. Please extend the lifting rod (neutral conduc-
tor and brown phase).
2. Turn the bushing away from the square tube
with a 24 mm open-ended spanner.
3. Now you can push the lifting rod through
the hole in the pan from below. Make sure
that the offset in the square tube protru-
des against the pan. The washer with the
rounding must be placed on the underside of
the sheet.
4. If you now push the bushing over the lifting
rod, you can screw everything together.
ATTENTION: The bushing only needs to be tight-
ened slightly so that the lifting motor is fixed in
position. Please do not forget to coat the thread
with Loctide 270 or an equivalent screw locking
agent.