I. PRODUCT FEATURES:
1. Imported time system (adjustable from 20 to 100 seconds) and imported
buzzer, reliable and durable.
2. The aluminum alloy heating plate adopts integral type, heating is uniform,
and the temperature can be adjusted up to 200 degrees.
The distance between the hamburger machine and the heating can be
adjusted.
II. SAFETY INSTRUCTIONS:
1. Anyone who operates the machine must strictly abide by the electricity
safety rules.
2. Personnel without professional training and who cannot strictly follow the
operating rules cannot operate the machine.
3. The machine needs to be installed and debugged before operation, and it
can be used only after the detection is correct. If there is a failure, it needs to
be powered off and repaired immediately.
4. The maintenance and installation of the machine must be carried out by
the person holding the electrician's certificate. Before the maintenance, stop
the standby device to cool to prevent burns.
III. BASIC PARAMETERS:
Model
TPK1
Volt
220-240V
Power
2400W
Dimension
410*700*330mm
IV. OPERATING INSTRUCTIONS:
1. Heating temperature, height adjustment, heating time control:
A. The temperature is preset at 170 degrees and the knob is adjusted
clockwise to increase the temperature, and vice versa.
B. The height of the baking package can be adjusted with a wrench to meet
the needs of the baking space and be controlled by yourself.
C. The time is preset to 60-90 seconds. To change the time, use a tool to
adjust the potentiometer (clockwise for extended time)
2. Start-up use:
A. Check whether the power supply is connected to the 220V/50Hz
single-phase power supply before starting and using, and whether it is
reliably grounded, then turn on the switch and warm up for 30 minutes.
B. Lift the panel: put 6-12 packages on the shovel (note: the package side is
facing down), place the prize shovel on the baking board, cover the cover
plate to pull out the shovel, and leave the package on the baking board.
C. Put the 6-12 bread on the shovel (note: the package face down) and place
the shovel in the next layer.
D. Pull down the handle to dry the plate and press it on the bag, at the same
time the time controller starts.
E. Push out the handle when the buzzer sounds, take out the lower layer bag,
lift the panel and take out the upper layer bag with a shovel.
V. MAINTENANCE AND CARE:
1. It is recommended to clean it regularly twice a week, turn off the power
before cleaning, and perform it after standby cooling.
2. It is strictly prohibited to use sharp metal to clean the heating plate and
shovel, so as not to damage the protective layer. Use a damp cloth to soften
the stolen goods and carefully remove it. Then wipe it with a dry cloth. Do not
use strong detergents, banana water, metal brushes, etc. for cleaning.
3. Before use, you should check whether the wiring is loose, whether the
voltage is normal, and whether the safety ground is connected reliably.
4. When installing the cleaning furnace body, it is forbidden to rinse directly
with water (or water column).
Keep hands dry during installation and use. Keep plugs and switches dry and
in contact.
VI. TRANSPORTATION AND STORAGE
During transportation, violent vibration and collision should be prevented.
