Gastrodomus ES110RG, Установка - Использование - Обслуживание

Страница: 9 / 24

9
Electrical connection
Make sure the electrical supply system complies with applicable laws. The
power cord must be stretched (avoid twisting or overlapping) in a position
not exposed to possible knocks or tampering, should not be in the vicinity
of liquid or water and heat sources. If it is damaged, have it replaced
immediately by qualified personnel. Always avoid the use of adapters.
5. TECHNICAL CHARACTERISTICS
Absorbed ladings and dimensions
The absorbed power, the external and internal dimensions for the various
models and in various configurations are shown in the table from chapter
11.
Noise and vibration
The sound level of the equipment fitted with integral hermetic condensing
unit does not exceed 70dB. Under normal conditions the equipment does
not generate vibrations which affect the surroundings.
6. USE
Activation
These cabinets are activated by a Thermostat. The operations available to
the user are:
Startup/shutdown oft he unit (fig. 1)
The thermostat may be adjusted from position 1 to position 7.
The equipment has few warning lamp: the green lamp indicates ON / OFF
of the equipment; the red lamp indicates compressor ON / OFF.
To turn off the cabinet, place the thermostat to 0 and disconnect the power
plug.
Setting the cell temperature
The appliance temperature can be set from 0 to +10 °C.
Storage of food-stuffs
In order to obtain the best functioning of the appliance, it is necessary to
observe the following instructions: place the merchandise into the unit only
after it has reached the desired operating temperature; do not place
uncovered hot foods or liquids inside the unit; package and protect foods
when possible; do not limit the circulation of air inside the cell with
obstacles; avoid frequent or prolonged openings of the door; wait a few
moments before reopening the door just after it has been closed.
Defrosting
The appliance defrosts automatically when the compressor is stopped.
7. MAINTENANCE
Periodic cleaning of cell and condenser
Before starting cleaning put the switch off and disconnect the plug. Is
important to clean the internal basin at least once a week by following the